- All Products
- RV & Marine Lighting
- LUMITEC HALO LED Down Light - Spectrum
| Color Temp Options | RGBW (Full Spectrum) |
| Switched | No |
| Wattage | 3.5W |
| Input Voltage (DC) | 10-30V |
| Lumens | 215 |
| Timed Toggled Protocol (TTP) | Yes |
| Dimmable | Third Party Dimmable (3PD) | Yes |
| PLI Enabled | Yes |
| Base Type | Recessed |
| Color Finish | White |
| IP Grade | IP67 |
| Hole Cutout (mm) | Ø 35 |
| Diameter (mm) | Ø 50 |
| Depth (mm) | 17.7 |
| HALO - Installation Instructions | Download |
|---|
Lumitec Lights with dimming functionality ramp up in intensity over a period of about 4 seconds when initially turned on. A brief “Off/On” toggle of the switch during the ramp phase will interrupt the ramp and hold the light at that intensity. If the light is already on then turn the switch off and repeat.
TTP, or Timed Toggle Protocol, is a beautifully simple solution to an otherwise vexing problem: How to provide sophisticated features like dimming and color change with no external control modules, using any standard off-the-shelf switch. Frequently emulated to the point of being almost an industry standard, Lumitec’s innovative TTP control uses brief “off/on” toggles of the light’s power switch to select an intensity level or cycle through output colors.
Multi-color or multi-output lights may incorporate Lumitec’s TTP technology. To change the output color or output mode of a light, briefly toggle the light OFF then immediately back ON. The light will cycle to the alternate or next output color Turn Switch to “On” position and wait for four seconds until the light ramps up to full intensity. Toggle switch “Off/On” quickly to change modes. Once for each mode.
Power Line Instruction (PLI) is an innovative, proprietary communication protocol built-in to most Lumitec products, that sends control/configuration instructions to Lumitec luminaires over the standard power wires. Learn more front our Tech Talk page.
- White Finish
- IP67 Waterproof
- RGBW Full Spectrum
- Multi-Voltage 10-30vDC