- All Products
- Solar Regulators
- Victron Smart Solar Regulator 50A MPPT with Bluetooth
| Input Voltage (Solar) | 100V (max) |
| Max Solar Input (Watts) | 700W (12V) | 1400W (24V) |
| Charge Current (Solar) | 50A |
| Conversion Efficiency (MPPT) | 98% |
| Battery Chemistry | Flooded / AGM / WET | Lithium (LiFeP04) |
| Smart Connect Ready | VE-Direct | Bluetooth |
| IP Grade | IP43 |
| Cooling | Self Cooling / Heatsink |
| Weight (Kg) | 1.4Kg |
| Dimensions (mm) | 130H × 186W × 70D mm |
| Charge Type | MPPT |
| Battery Voltage | 12V | 24V |
| Battery Selection Mode | Bluetooth APP |
| SmartSolar MPPT 100/30 & 100/50 | Download |
|---|
The 'Max Solar Input' is related to the nominal voltage the battery bank (NOT the solar panel voltage). If you have a 130W solar panel and a 12V battery bank the max charge current will be 10 Amps, if you have a 260W solar panel and a 24V battery bank the max charge current will also be 10 Amps - This means a 260W solar panel and a 12V battery bank the max charge current will now be 20 Amps. Simply divide Power (Watts) by Voltage (Of Battery Bank) to calculate solar regulator current rating.
A very basic summary is a PWM controller will deliver current out of the panel at just above the battery voltage. It 'clips' much of the useable panel voltage and simply regulates current, making the efficiency low (70-80%) but a very safe multi-stage charging device. With an MPPT solar charge controller the current is drawn out of the panel by sweeping the full voltage range / curve of the panel “Maximum Power Point Tracking” making them very efficient (98%+) and superior in many ways including load sensing. You can think of an MPPT controller as being a “smart solar DC-DC converter”.
- 50A maximum battery charging current
- 12V / 24V DC automatic battery voltage detection
- Maximum recommended nominal solar power: 700W at 12V / 1,400W at 24V
- 100V maximum solar PV open-circuit voltage
- 60A maximum PV short-circuit current
- Ultra-fast Maximum Power Point Tracking (MPPT)
- Advanced tracking performance during partial shading
- Up to 98% conversion efficiency
- Built-in Bluetooth for VictronConnect monitoring and configuration
- VE.Direct communication port for integration with Victron monitoring systems
- Compatible with AGM, GEL, flooded lead-acid and lithium battery systems
- Programmable adaptive multi-stage charging
- Electronic protection against PV reverse polarity, short circuits and overheating
- Fan-free cooling for quiet, reliable operation
- Operating temperature: -30°C to +60°C
- IP43 protection for electronic components / IP22 connection area
- Victron 5-Year Limited Warranty
Accessory Products
$ 140.00
$ 140.00
Alternative Products
$ 249.00
$ 249.00
$ 124.99
$ 124.99



