Holiday Closure

We will be closed for the Christmas period from 19 December to 19 January 2026. All orders received during this time will be processed after we reopen.

Merry Christmas and Happy New Year from the Team at Dualcom.

  1. All Products
  2. Commercial Lighting
  3. 5M Reel (4.8W P/Meter) - 12V Indoor Strip Light
[ALP21-1M-X2] Surface Lighting Profile - ALP21

$ 65.00 $ 56.52

$ 90.00

Not Available For Sale

5M Reel (4.8W P/Meter) - 12V Outdoor Strip Light

$ 126.50 $ 110.00

$ 90.00

Not Available For Sale

5M Reel (4.8W P/Meter) - 12V Indoor Strip Light

https://www.dualcom.co.nz/web/image/product.template/157/image_1920?unique=8375895

$ 78.26$ 90.00 89.99900000000001 NZD

$ 90.00

Not Available For Sale

  • Color Temp

This combination does not exist.

This Low density strip light is ideal for lighting areas where low power usage is a critical factor. Using only 4.8W p/meter you can achieve sufficient ambient lighting while power usage is kept to a minimum, especially when it comes to off-grid battery setups in RV and Boating. Adhesive 3M VHB Backing tape to make installation secure, quick and easy.

Contact Us
DUALCOM

Dualcom Technology is an Importer/Distributor of Lighting and Solar Energy products. Established 2009 the team is focused on product solutions for Commercial, RV and Marine industries.

SL3528-60L-WW-IP44-X5

Specifications

Color Temp Options 3000K (warm) | 6000K (cool)
Input Voltage (DC) 12V
Wattage Per Meter 4.8W
LED Type SMD3528
LED Per Meter 60
CRI 80+
Lumen Per Meter 360Lm
IP Grade IP44
Section Length Per Cut 50mm
Width 8mm
Height 1.6
Reel Length 5 Meters
Cable Length 5 Meters
Adhesive Backing 3M VHB
Yes, every section of LED has a copper join which you can cut with a box knife or scissors. See Section Length Per Cut in the product specifications.
Yes, when adding wire we recommend soldering new wire in place for the most robust connection, the polarity (+/-) is marked on the strip light. Alternatively solderless wire clamps are available for our non-waterproof strip light.
Tinning is applying the solder to each part first. Tin the wire and then Tin the strip light copper joins , hold together and apply a small amount of heat to melt solder together to join. Doing this stops the strip light from being overheated (being quick) and the join is clean with less chance of a short being created. You can also use FLUX to help with solder pooling for a better connection and flow.
Yes, all of our strip light will handle changes in voltage due to charging etc. 12V products will handle up to 15vDC and 24V products will handle up to 29vDC. Most of our strip lighting will go into the RV and Marine industry where unregulated battery systems are the primary source of power.
Product Image
5M Reel (4.8W P/Meter) - 12V Indoor Strip Light

$ 90.00 $ 78.26

$ 90.00

Not Available For Sale