- All Products
- Battery Monitoring
- BMPRO DRIFTER
| System Compatibility | Stand Alone |
| Input Voltage (DC) | 8 - 15V |
| Voltage Measurement Resolution | <20mV |
| Current Measurement Range | 100A |
| Continuous Current Rating | 80A |
| Current Measurement Resolution | <20mA |
| Monitored Battery Capacity | 7Ah to 999Ah |
| Communication Method | Hard Wired |
| Water Tank Monitoring | Yes |
| Tank Sender Compatibility | Tank Dipper | Tank Bungs |
| USB Charger | Yes |
| Clock | 12hr or 24hr |
| Back Light | Yes |
| Installation | Wall Mount |
| Operating Temperature | 0°C to 50°C |
| Dimensions (mm) | 149 * 85 * 22 |
The Drifter is not compatible with lithium batteries. The state of charge algorithms are programmed for AGM batteries only.
No, the Drifter cannot be upgraded to work with lithium batteries.
The Drifter’s screen power is separate from the pump and isolation switches. Check the fuse at your battery positive terminal, this supplies power to pin 2 of the 5 pin connector.
Tank sensors can read incorrectly due to mineral and scale build-up. It is recommended to clean your tanks with a tank cleaning tablet.
You can run an inverter with the Drifter. The Drifter can take up to 80A constant, 100A peak with the standard 100A shunt.
FEATURES
Large LCD screen for day and night viewing
Low voltage warning
Water tank monitoring and water pump control switch
Displays remaining time left in battery
Displays battery volts and amps, charge/discharge status, and remaining capacity
Battery Charging and Discharging indicator
USB charging port
Clock and temperature gauge
Battery isolator switch
Compatible with any 12V lead acid battery
Alternative Products
$ 448.99
$ 448.99