- All Products
- Solar & Electrical
- BMPRO JCONTROL
| System Compatibility | J35 (BMS) |
| Power Source | J35 Battery Management System |
| Input Voltage (DC) | 8 - 15V |
| Communication Method | CAN Bus |
| Smart Connect Ready | No |
| Water Tank Monitoring | Yes |
| Tank Sender Compatibility | Tank Dipper | Tank Bungs |
| Back Light | Yes |
| Installation | Wall Mount |
The ability to configure battery chemistry is available only if the JControl is in use with the J35B-L or J35D, which are capable of charging both lead acid and LiFePO4 type batteries. By default, the J35B-L or J35D are configured to charge lead acid batteries. This can be changed with the JControl monitor. To configure the J35B-L or J35D to charge LiFePO4 batteries with the JControl monitor: Enter Set-Up mode by holding the SETTINGS button down until Set-Up is seen in the AMPS and VOLTS display. Navigate to the ADVANC menu function. Navigate and select LiFePO4.
Battery voltage & charge status
Battery charging & discharging currents
Auxiliary & solar charging currents
Time remaining to discharge
Level indication of up to 4 water tanks
Water pump status
Requires J35 power management system installed