- All Products
- Solar & Electrical
- BMPRO ProBoost40
| Charge Current (Solar) | 40A |
| Charge Type | MPPT |
| Max Solar Input (Watts) | 800W |
| Input Voltage (DC AUX) | 9 - 18V |
| Charge Current (DC-DC) | 40A |
| Input Voltage (Solar) | 10 - 32V (max) |
| Battery Chemistry | Flooded / AGM / WET | Lithium (LiFeP04) |
| Battery Voltage | 12V |
| IP Grade | IP66 |
| Cooling | Self Cooling / Heatsink |
| Dimensions (mm) | 183 x 130 x 43 |
Yes, the ProBoost40 will work with smart alternators.
We recommend using bolt down fuses, as they ensure a low resistance connection. Blade type fuses are not recommended. These fuses can result in a high resistance connection which causes excess heat, which may damage the fuse holder and/or the wiring. Self-resetting circuit breakers are not recommended. These may trip prematurely due to the heat generated by the current flowing through the wires.
To set the battery type of the ProBoost40, press the Mode button on the front of the ProBoost40 until the LED is lit for the correct battery.
Yes, you can use the ProBoost40 inside your engine cabin. The ProBoost40 is designed to be installed in a variety of environments, including the chassis rail, engine cabin and driver cabin.
In vehicle multi-stage DC-DC charger
Dual input MPPT solar/aux (alternator)
Multi battery chemistry selector
Suitable for modern smart alternators
IP66 rating – resistant to dust, water and shock damage
Maintains a 100% state of charge of auxiliary batteries
BMPRO signature durability and ease of use




