Born by the innovated spirit of our parent company SETEC, with 50 years power solutions in Australia, bred in Melbourne and inpired by the great Australian outdoors. We are number one in RV Power Management. We are BMPRO, your battery management professionals.
The load may be faulty, activating the protective electronic fuse and turning the load off. If this is the case, the LED Status Indicator on the ASPower will flash a solid red. Should you encounter any faulty loads, please contact your caravan dealership.
All loads will power down, but the ASDisplay will still be in use if the ASPower was put into ECO Mode. The ASPower will be put into ECO Mode if: The ECO Mode button on the ASDisplay has been pressed. This turns off power to all caravan loads connected to the ASPower, except output 14. Check if there is a green LED light next to the ECO Mode button on the ASDisplay. If there is, press the ECO Mode button again to exit ECO Mode. Battery voltage is very low. The ASPower will enter ECO Mode to conserve remaining battery voltage, which will disable power to all caravan loads connected to the ASPower. Connect the ASPower to a power source and begin battery charging.
Check the following: The battery connections are tight and not loose or corroded. Battery polarity: red lead is positive, black lead is negative. The battery fuse on the ASDisplay is fitted and not blown. The correct value is 40A.
Complete power management & monitoring system for RVs
Monitor battery status & water tank levels
Multi-input – AC/Solar/DC
Charges all RV battery types
*Battery chemistry can only be altered or changed with the use of an ASDisplay