- All Products
- Solar & Electrical
- BMPRO J35D Battery Management
| Charge Current (Solar) | 28A |
| Input Voltage (AC) | 110-240vAC |
| Charge Current (AC) | 30A |
| Input Voltage (Solar) | 15 - 25V (max) |
| Battery Chemistry | Flooded / AGM / WET | Lithium (LiFeP04) |
| Smart Connect Ready | Yes |
| Low Voltage Disconnect | 10.5V |
| Battery Connect after LVD | 12.8V |
| Cooling | Thermally Controlled Fan |
| Weight (Kg) | 2 |
| MANUAL (J35A / J35B-L / J35D) | Download |
|---|
If your BP35 or J35 unit has solar in built, the positive and negative leads from your solar panels are connected directly to the solar input and output on the solar distribution board. The solar regulator is in built for this.
The max input voltage for the built-in regulator is 25V, so be sure to check the "Voc" value of your solar panel does not exceed this.
When the BP35 is powered solely by DC power, there are physical limitations within the electronics, which mean that the unit will only start supplying power after approximately 30-45 seconds. If powered by AC power, these outputs such as lights etc. will turn on immediately.
KEY FEATURES
14 x 12VDC outputs
35A maximum output current
30A maximum charging current
Solar 28 Amp
Lithium (LiFePO4) compatible
This product is specifically designed for and exclusively supplied in a range of Jayco recreational vehicles.
Accessory Products
$ 540.01
$ 540.01
$ 689.00
$ 689.00
$ 960.00
$ 960.00
$ 379.99
$ 379.99
Alternative Products
$ 995.00
$ 995.00
