Solar Camera Power System – 120Ah Lithium | IP66 Steel Enclosure

Solar Camera Power System – 120Ah Lithium | IP66 Steel Enclosure

Name: Solar Camera Power System – 120Ah Lithium | IP66 Steel Enclosure
Availability: OutOfStock

The Dualcom Solar Camera Power System is a professionally engineered off-grid solution designed to provide reliable, autonomous power for CCTV cameras, communications equipment and other remote monitoring devices.

Each system is housed within a heavy-duty IP66 powder-coated steel enclosure and is fully assembled, configured and tested in-house by Dualcom before dispatch. Designed for demanding outdoor environments, it combines premium Victron Energy charging and monitoring equipment with a 120Ah lithium battery, fused DC distribution and remote system connectivity.

This unit is also equipped with a DDR-120A-48V DCDC converter for powering 48V routers using POE cameras.

Remote Monitoring and Equipment Control

The integrated Victron Cerbo GX can connect to an existing internet connection through its LAN port or Wi-Fi. Once connected, authorised users can securely access the system through the Victron Remote Management (VRM) Portal from anywhere with an internet connection.

The VRM Portal provides remote visibility of important system information, including:

Battery state of charge
Battery voltage and current
Solar charging performance
Historical energy and charging data
System alarms and operational status

The Cerbo GX also provides two programmable 3A relay outputs. When correctly configured and interfaced with the connected equipment, these relays can be used to remotely switch compatible devices or circuits on and off. This may be useful for remotely restarting a camera, router or communications device without requiring a site visit.

Please note that an active internet connection is required for remote VRM monitoring and control. Cellular modem, SIM card and data connection are not included unless specified.

Applications

CCTV camera systems
ANPR cameras
Security and surveillance equipment
Remote communications
Telemetry systems
Environmental monitoring
Gate and access-control equipment
Temporary site monitoring
Infrastructure monitoring

Dualcom can customize each system to suit the site, connected equipment and required operating time. Available options include alternative battery capacities, solar panel sizes, communications equipment, enclosure sizes and customer-specific power distribution or control configurations.

Add to wishlist

Input Voltage (Solar)	100V (max)
Battery Capacity	120Ah
Max Solar Input (Watts)	220W (12V) \| 440W (24V)
Charge Current (Solar)	15A
Battery Voltage	12V
Charge Type	MPPT
Conversion Efficiency (MPPT)	98%
Battery Chemistry	Lithium (LiFeP04)
Smart Connect Ready	VE-Direct \| Bluetooth
Low Voltage Disconnect	10.5V
IP Grade	IP66
Cooling	Self Cooling / Heatsink
Weight (Kg)	29
Dimensions (mm)	500H x 400W x 250D

Heavy-duty IP66 powder-coated steel enclosure
Professionally engineered and assembled in New Zealand
Premium Victron Energy charging and monitoring components
120Ah LiFePO₄ lithium battery
Intelligent battery and solar monitoring
Secure access through the Victron VRM Portal
Real-time remote system monitoring
Historical performance data and system alarms
Two programmable 3A relay outputs
Remote switching or restarting of compatible equipment
Fused 12V DC power distribution
12 to 48V DCDC Meanwell DIN Rail PSU
Suitable for CCTV, communications, telemetry and remote infrastructure applications
Integrated Components
IP66 steel enclosure – 500H × 400W × 250Dmm
Victron Cerbo GX communication and monitoring controller
Victron SmartSolar MPPT 75/15 Solar Charge Controller
Victron SmartShunt Battery Monitor
120Ah 12V LiFePO₄ lithium battery
4-way fused 12V DC distribution block
4-pole negative busbar
Custom-Built to Suit Your Project