- All Products
- Underwater Lighting
- Lumitec SeaBlaze Mini SPECTRUM
| Color Temp Options | RGBW (Full Spectrum) |
| Wattage | 10.5W |
| Input Voltage (DC) | 10-30V |
| Dimmable | No |
| Timed Toggled Protocol (TTP) | Yes |
| Base Type | Surface Mount |
| Color Finish | Grey |
| IP Grade | IP68 |
| Material | Anodized Aluminum |
| Diameter (mm) | Ø 76 |
| Depth (mm) | 15 |
| INSTRUCTIONS (MINI) | Download |
|---|
Use 3M 4200 adhesive or equivalent underwater adhesive. Coat the entire back of the housing including screws stem, plastic strain relief and approx 50mm of the cable. DO NOT OVER TIGHTEN! Secure in place and let the adhesive sealant do its job.
Yes, for LUMITEC bronze underwater lights you may paint the housing with a bronze compatible Anti-Fouling paint, for LUMITEC Anodized Aluminum housing use a aluminum compatible Anti-Fouling paint or suitable prop-speed product.
TTP, or Timed Toggle Protocol, is a beautifully simple solution to an otherwise vexing problem: How to provide sophisticated features like dimming and color change with no external control modules, using any standard off-the-shelf switch. Frequently emulated to the point of being almost an industry standard, Lumitec’s innovative TTP control uses brief “off/on” toggles of the light’s power switch to select an intensity level or cycle through output colors.
Multi-color or multi-output lights may incorporate Lumitec’s TTP technology. To change the output color or output mode of a light, briefly toggle the light OFF then immediately back ON. The light will cycle to the alternate or next output color Turn Switch to “On” position and wait for four seconds until the light ramps up to full intensity. Toggle switch “Off/On” quickly to change modes. Once for each mode.
Full-colour RGBW Spectrum output
670-lumen white light output
Extensive colour selection and automatic colour-cycle mode
PLI enabled for integration with Lumitec Poco
Timed Toggle Protocol control through a standard switch
No external driver or controller required
Compact design ideal for trailer boats and skiffs
Marine-grade anodised aluminium housing
Heat-tempered glass lens
Completely sealed and IP68 rated
Low-profile surface-mount installation
Low 10.5W power consumption
Suitable for 12V and 24V DC marine systems
Designed and manufactured in the USA
Lumitec three-year manufacturer’s warranty
Alternative Products
$ 650.00
$ 650.00
$ 494.99
$ 494.99